Dr. Fin Caton-Rose

Reader

Area          School of BEACI
                 Faculty of Eng & Digital Technologies
E-mail      P.Caton-Rose@bradford.ac.uk
Phone      +441274233100

一. Biography

Graduated in Engineering for Design and Manufacture (BEng) at Hull University in 1992 before starting work on the design, build and testing of a ceramic water pump for the Water Hydraulics Research Group at the same University. In 1995 Dr Caton-Rose registered for an industrially sponsored PhD into the computer modelling of large strain deformation for geogrid applications. Dr Caton-Rose graduated in January 2000, having joined the Polymer Engineering research group as a research member of staff the previous September. Dr Caton-Rose became a Research Investment Lecturer in 2003 and was promoted to Senior Lecturer in Polymer Engineering in 2006. Dr Caton-Rose is the Manager of the Solid Phase Polymer Processing Group and Manager of the Computer Modelling Research Centre within the Polymer IRC. In 2013 he became Head of Product Design, in the School of Engineering, Design and Technology, and in 2014 was appointed Head of Design in the newly formed School of Media, Design and Technology until November 2015. In 2022 he became Head of the Department of Media Design and Technology. He is a member of the Centre of Advanced Materials Engineering and Centre for Polymer Micro and Nano Technology. Dr Caton-Rose has taught across the Design and Engineering disciplines with specific interests in computer aided design (both traditional and freeform), finite element analysis, digital prototyping, individual and group studio projects and motion capture. His current research activities include fibre orientation and fibre breakage studies during the injection moulding of composite materials (both computational and experimental), advanced process visualisation, solid phase deformation, biocompatitble and bioresorbable polymers, shape memory polymers, reverse engineering and rapid prototyping.

二. Teaching

Computer aided engineering, engineering design, motion capture, digital scanning and reverse engineering.

三. Professional activities

1. Awards(2)

(1) Fellow of the Higher Education Academy

(2) Board Member Advanced Materials Research Institute (UK - Chi

2. Education(2)

(1) University of Bradford - PhD

(2) Hull University - Engineering for Design and Manufacture (BEng)

四. Publications

1. Conference publication(17)

(1) Orientation, dispersion and length reduction of fibres in long glass fibre reinforced injection moulding

Caton-Rose P.;Gilson M.;Hine P. (2017) ICCM International Conferences on Composite Materials. 2017-August

(2) Assessing a complete CAD solution for the design and use of short fibre composites by means of a combination of Moldflow and ABAQUS

Hine P.;Parveen B.;Caton-Rose F. (2016) ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.

(3) Investigating fibre orientation, dispersion and length reduction in long glass fibre reinforced injection moulding

Caton-Rose F.;Hine P. (2016) ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials.

(4) Understanding the differential thermal behaviour of an oriented polymeric film, in response to the modulated differential scanning calorimetry variables, for determination of the degree of crystallinity

Ambardekar R.;Karandikar H.;Kelly A.;Caton-Rose P.;Coates P.;Paradkar A. (2015) AIP Conference Proceedings. 1664

(5) Study of injection moulded long glass fibre-reinforced polypropylene and the effect on the fibre length and orientation distribution

Parveeen B.;Caton-Rose P.;Costa F.;Jin X.;Hine P. (2014) AIP Conference Proceedings. 1593, 432-435.

(6) Through process modeling for the fatigue life assessment of notched injection-molded specimens

Castagnet S.;Nadot-Martin C.;Bernasconi A.;Lainé E.;Conrado E.;Caton-Rose P. (2014) 16th European Conference on Composite Materials, ECCM 2014.

(7) Experimental and numerical analysis of fibre orientation in injection moulded short glass fibre reinforced polyamide 6 notched specimens

Caton-Rose P.;Hine P.;Bernasconi A.;Conrado E. (2014) 16th European Conference on Composite Materials, ECCM 2014.

(8) Prediction of fibre orientation in short glass fibre reinforced composite injection moulding

Caton-Rose P.;Hine P.;Parveen B. (2013) ICCM International Conferences on Composite Materials. 2013-July, 1706-1713.

(9) Measurement and prediction of short glass fibre orientation in injection moulding composites

Caton-Rose P.;Hine P.;Costa F.;Jin X.;Wang J.;Parveen B. (2012) ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.

(10) The effect of fibre length on fibre orientation structures in injection moulded glass fibre reinforced PP plates

Hine P.;Parveen B.;Caton-Rose F. (2012) ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials.

(11) Development of a constitutive model of polypropylene for thermoforming

O'Connor C.;Martin P.;Menary G.;Sweeney J.;Caton-Rose P.;Spencer P. (2011) AIP Conference Proceedings. 1353, 874-879.

(12) The large strain response of polypropylene in multiaxial stretching and stress relaxation

Sweeney J.;Caton-Rose P.;Spencer P.;O'Conner C.;Martin P.;Menary G. (2011) AIP Conference Proceedings. 1353, 850-855.

(13) Analysis of in die cavitation during the die drawing of composite materials

Caton-Rose P.;Ward I.;Thompson G.;Coates P. (2009) Annual Technical Conference - ANTEC, Conference Proceedings. 3, 1494-1498.

(14) Control of density and modulus in die drawn PP composites

Caton-Rose P.;Ward I.;Thompson G.;Coates P.;Nichols K.;Birchmeier B. (2009) Annual Technical Conference - ANTEC, Conference Proceedings. 4, 2036-2039.

(15) Fibre orientation measurement and prediction within gates and ribs of injection moulded parts

Caton-Rose P.;Coates P.;Whiteside B.;Hine P.;Duckett A. (2005) Annual Technical Conference - ANTEC, Conference Proceedings. 4, 294-298.

(16) Measurement and prediction of fibre orientation within a three-dimensional flow

Caton-Rose P.;Coates P.;Whiteside B.;Hine P.;Duckett A.;Jittman P.;Chapman C.;Smith G. (2004) Annual Technical Conference - ANTEC, Conference Proceedings. 2, 2241-2245.

(17) Fibre orientation structures and their effect on crack resistance of injection moulded transverse ribbed plate

Hine P.;Duckett R.;Caton-Rose P.;Coates P. (2004) Plastics, Rubber and Composites. 33, 43-53.

2. Peer reviewed journal (32)

(1) Long-chain branched poly(lactic acid)- b-poly(lactide- co-caprolactone): Structure, viscoelastic behavior, and triple-shape memory effect as smart bone fixation material

Liu Y.;Cao H.;Ye L.;Coates P.;Caton-Rose F.;Zhao X. (2020) Industrial and Engineering Chemistry Research. 59, 4524-4532.

(2) Die geometry induced heterogeneous morphology of polypropylene inside the die during die-drawing process

Lyu, D.; Sun, Y.; Thompson, Glen P.; Lu, Y.; Caton-Rose, Philip D.; Lai, Y.; Coates, Philip D.; Men, Y. (2019)

(3) Multiple shape memory behavior of highly oriented long‐chain‐branched poly(lactic acid) and its recovery mechanism

Li, J.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D. (2019)

(4) Multiple shape memory behavior of highly oriented long-chain-branched poly(lactic acid) and its recovery mechanism

Li J.;Zhao X.;Ye L.;Coates P.;Caton-Rose F. (2019) Journal of Biomedical Materials Research - Part A. 107, 872-883.

(5) Controlled in vitro degradation behavior of highly oriented long-chain-branched poly(lactic acid) produced by solid-phase die drawing

Li R.;Li J.;Zhao X.;Ye L.;Coates P.;Caton-Rose F. (2019) Journal of Biomedical Materials Research - Part A.

(6) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication

Hebda, Michael; McIlroy, C.; Whiteside, Benjamin R.; Caton-Rose, Philip D.; Coates, Philip D. (2019) Additive Manufacturing.

(7) Application of activated barrier hopping theory to viscoplastic modeling of glassy polymers

Sweeney, John; Spencer, Paul E.; Vgenopoulos, Dimitrios; Babenko, Maksims; Boutenel, F.; Caton-Rose, Philip D.; Coates, Philip D. (2018) Mechanics of Time-Dependent Materials. 22, 145-165.

(8) Orientation direction dependency of cavitation in pre-oriented isotactic polypropylene at large strains

Lu, Y.; Thompson, Glen P.; Lyu, D.; Caton-Rose, Philip D.; Coates, Philip D.; Men, Y. (2018)

(9) Nanoindentation analysis of oriented polypropylene: Influence of elastic properties in tension and compression

Vgenopoulos, D.; Sweeney, John; Grant, Colin A.; Thompson, Glen P.; Spencer, Paul E.; Caton-Rose, Philip D.; Coates, Philip D. (2018) Polymer. 151, 197-207.

(10) Structure and biocompatibility improvement mechanism of highly oriented poly(lactic acid) produced by solid die drawing

Li J.;Li Z.;Ye L.;Zhao X.;Coates P.;Caton-Rose F. (2017) European Polymer Journal. 97, 68-76.

(11) Structure evolution and orientation mechanism of long-chain-branched poly (lactic acid) in the process of solid die drawing

Li, J.; Li, Z.; Ye, L.; Zhao, X.; Coates, Philip D.; Caton-Rose, Philip D. (2017)

(12) Structure and biocompatibility of highly oriented poly(lactic acid) film produced by biaxial solid hot stretching

Li Z.;Ye L.;Zhao X.;Coates P.;Caton-Rose F.;Martyn M. (2017) Journal of Industrial and Engineering Chemistry. 52, 338-348.

(13) High orientation of long chain branched poly (lactic acid) with enhanced blood compatibility and bionic structure

Li, Z.; Ye, L.; Zhao, X.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T. (2016)

(14) Fibrillation of chain branched poly (lactic acid) with improved blood compatibility and bionic structure

Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T. (2015)

(15) Structure and blood compatibility of highly oriented poly(l-lactic acid) chain extended by ethylene glycol diglycidyl ether

Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T. (2015)

(16) Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing

Li, Z.; Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D.; Martyn, Michael T. (2014)

(17) Validation of the modified rule of mixtures using a combination of fibre orientation and fibre length measurements

Hine, P.; Parveen, Bushra; Brands, D.; Caton-Rose, Philip D. (2014)

(18) The large strain response of polypropylene in multiaxial stretching and stress relaxation

Sweeney, John; Caton-Rose, Philip D.; Spencer, Paul E.; Pua, H.; O'Connor, C.P.J.; Martin, P.J.; Menary, G. (2013)

(19) Process structuring of polymers by solid phase orientation processing

Coates, Philip D.; Caton-Rose, Philip D.; Ward, Ian M.; Thompson, Glen P. (2013)

(20) Shear-induced crystallization morphology and mechanical property of high density polyethylene in micro-injection molding

Lin, X.; Caton-Rose, Philip D.; Ren, D.Y.; Wang, K.S.; Coates, Philip D. (2013)

(21) Simulation of the plug-assisted thermoforming of polypropylene using a large strain thermally coupled constitutive model

O'Connor, C.P.J.; Martin, P.J.; Sweeney, John; Menary, G.; Caton-Rose, Philip D.; Spencer, Paul E. (2013)

(22) Structure and blood compatibility of highly oriented poly(lactic acid)/thermoplastic polyurethane blends produced by solid hot stretching

Zhao, X.; Ye, L.; Coates, Philip D.; Caton-Rose, Philip D. (2013)

(23) A material model for multiaxial stretching and stress relaxation of polypropylene under process conditions

Sweeney J.;O'Connor C.;Spencer P.;Pua H.;Caton-Rose P.;Martin P. (2012) Mechanics of Materials. 54, 55-69.

(24) Unified model of necking and shear banding in amorphous and semicrystalline polymers

Sweeney J.;Caton-Rose P.;Spares R.;Coates P. (2007) Journal of Applied Polymer Science. 106, 1095-1105.

(25) A unified model of necking and shear banding in amorphous and semicrystalline polymers

Coates, Philip D.; Sweeney, John; Caton-Rose, Philip D.; Spares, Robert (2007)

(26) Modelling the large strain constitutive behaviour of polycarbonate under isothermal and anisothermal conditions

Sweeney, John; Caton-Rose, Philip D.; Coates, Philip D. (2005)

(27) Modeling the large-strain constitutive behavior of polycarbonate under isothermal and anisothermal conditions

Sweeney J.;Caton-Rose P.;Coates P. (2005) Journal of Applied Polymer Science. 96, 2105-2116.

(28) Fibre orientation: Measurement, modelling and knowledge based design

Hine P.;Duckett R.;Caton-Rose P.;Coates P.;Jittman P.;Chapman C.;Smith G. (2005) Plastics, Rubber and Composites. 34, 417-424.

(29) Fibre orientation structures and their effects on crack resistance of injection moulded transverse ribbed plate

Coates, Philip D.; Caton-Rose, Philip D.; Duckett, R.A.; Hine, P.J. (2004)

(30) The modelling of large deformations of pre-oriented polyethylene

Sweeney J.;Caton-Rose P.;Coates P.D. (2002) Polymer. 43, 899-907.

(31) The modelling of large deformations of pre-oriented polyethylene

Sweeney, John; Caton-Rose, Philip D.; Coates, Philip D. (2002)

(32) Finite element simulation of geogrid manufacture using large deformation elastic formulation

Caton-Rose P.;Sweeney J.;Collins T.;Coates P. (2000) Plastics, Rubber and Composites Processing and Applications. 29, 51-58.